H&R Trak+ 15mm DRS Wheel Adaptor Bolt 4/98 Center Bore 58 Stud Thread 12x1.25

All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines: a) If possible, name the brand of wheel. b) New bolts must be longer than the original bolts by the width of the wheel spacer used. c) The bolt head must be identical to the existing bolt: Taper 60 End digit 01 Round head for M12/d24 mm, for M14/d28 mm End digit 02 Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03 Flat head for Porsche original wheels M14 x 1.5 End digit 06 d) Safety guidelines (Minimum number of turns for wheel bolts / nuts): M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

This Part Fits:

Year	Make	Model	Submodel
2019	Fiat	500	1957 Retro Edition
2012-2019	Fiat	500	Abarth
2013-2019	Fiat	500	Abarth Cabrio
2016	Fiat	500	c Easy
2012	Fiat	500	c Gucci
2012-2019	Fiat	500	c Lounge
2012-2019	Fiat	500	c Pop
2013-2019	Fiat	500	E
2019	Fiat	500	E-Sport
2016	Fiat	500	Easy
2012	Fiat	500	Gucci
2012-2019	Fiat	500	Lounge
2012-2019	Fiat	500	Pop
2012-2016	Fiat	500	Sport
2013-2016	Fiat	500	Turbo